Uncategorized
8 CHANNEL POWER SUPPLY
Overview
- Input Voltage Range: 85-300V
- Output Voltage : 12V DC
- Efficiency: >85%
- Operating Temp: 0-55 C
- Line Regulation: <1%
- Load Regulation: <1%
- Ripple: <40mv p-p
- Isolation Between I/P& O/P : 3KV AC
Compare
Related products
-
Uncategorized
CD-DVD-BLUERAY 1:11 DUPLICATOR CARD
This is a stand-alone CD/DVD Disc Duplicator Controller. Therefore the controller can control difference CD/DVD devices with different model, brand or burning speed to operate at the same time.
Overview
- No PC needed. Independent IDE CDDVD Disc Duplicate
- Auto detect IDE devices as soon as system power on.
- Easy firmware update. ust place an update CD into any drive, within few seconds, the firmware was easily loaded
- 2×16 LCD panel and 4 control buttons
- Support upto max. 52X CD duplication, 20X DVD duplication
- Special Synchronous Load and Copy technology. When the system was installed with HDD, the system will load master source disc to HDD while copying disc to disc. In 2nd run copy, the system will automaticallyt copy from HDD instead of the source disc placed in the reader
- Support Audio track editing
- Special pre-scan to evaluate the master source disc before copying to ensure a successful copy.
- Test copy to simulate real copy process.
- Verify to check and ensure the readability of copied dis.
- Support all major disc types
- Auto-detect source disc
- Set button beep sound
SKU: n/a -
Uncategorized
NEW DRIVER 2
System Overview
Driver 2A controller is the only piece of equipment between the video source and LED screen. The sending card can be compatible with Colorlight T7, Nova MSD300, Linsn 801, 802 and DBstar HRV2011. User can control the brightness from the front panel directly. Besides, Driver 2A integrates one more sending card inside for backup, which is so important during application for safe concern. And compare with normal RJ45 connector, Driver 2A controller use Ethercon soft-patched connectors to make sure lock connection and better protection for the CAT5 cable.- Brand: RGB Link
- Category: LED Display Control
SKU: n/a -
Uncategorized
450 WATTS 24 PINS
Overview
- Lightning Proof
- Fan for Temperature Control
- Complies with FCC part 15J Class B1 15 VAC operation and CISPR 22 230 VAC operation
- Low noise and ripple
- Over 68 % efficiency typical on full Load
- Universal motherboard plug 20+4 Pin supporting the latest motherboards
- Output over voltage. Over current protection
- Short Circuit protection on all output
- 100% burn-in tested (45�C + 5�C)
- 100% Hi-pot. ATE Tested
- Over 50000 Hours MTBF at 25�C + 5VSB 2.0A.
SKU: n/a -
Uncategorized
DRIVER 2A
System OverviewDriver 2A controller is the only piece of equipment between the video source and LED screen. The sending card can be compatible with Colorlight T7, Nova MSD300, Linsn 801, 802 and DBstar HRV2011. User can control the brightness from the front panel directly. Besides, Driver 2A integrates one more sending card inside for backup, which is so important during application for safe concern. And compare with normal RJ45 connector, Driver 2A controller use Ethercon soft-patched connectors to make sure lock connection and better protection for the CAT5 cable.- Brand: RGB Link
- Category: LED Display Control
SKU: n/a
There are no reviews yet.